Skymen Technology Corporation Limited
Skymen Ultrasonic Professional ultrasonic cleaning machine manufacturer
Add to Cart
10L Ultrasonic Cleaner 240W for Semiconductor / Integrated Circuit 40KHz
Specification:
| Model | JP-040S |
| Ultrasonic frequency | 40,000Hz |
| Material of tank | SUS304 |
| Material of shell | SUS304 |
| Capacity | 10L |
| Drain value | On the left side |
| Timer | 0~30 mins adjustable |
| Temperature | 20~80℃ adjustable |
| Power supply type 1 | AC 100~120V, 50/60Hz |
| Power supply type 2 | AC 220~240V, 50/60Hz |
| Ultrasonic power | 240W |
| Heating Power | 200W |
| Tank inner dimension | 300*240*150mm |
| Unit dimension | 380*290*280mm |
| Packing size | 440*365*360mm |
| N.W. | 7.5kg |
| G.W. | 8.45kg |
| Certificate | FCC & CE & RoHS & REACH |
Similar models with different capacity:
| Model | Capacity | Tank Size | Ultrasonic Power | Heating Power | Frequency |
| (L) | (L*W*H)mm | (W) | (W) | (KHz) | |
| 008 | 0.8 | 150*85*65 | 35 | 0 | 40 |
| 009 | 0.9 | 150*135*65 | 60 | 100 | 40 |
| JP-010T | 2 | 150*165*100 | 60 | 100 | 40 |
| JP-020S | 3.2 | 240*135*100 | 120 | 100 | 40 |
| JP-030S | 4.5 | 300*150*100 | 180 | 200 | 40 |
| JP-031S | 6.5 | 300*150*150 | 180 | 200 | 40 |
| JP-040S | 10 | 300*240*150 | 240 | 200 | 40 |
| JP-060S | 15 | 330*300*150 | 360 | 300 | 40 |
| JP-080S | 22 | 500*300*150 | 480 | 500 | 40 |
| JP-100S | 30 | 500*300*200 | 600 | 500 | 40 |
Image:
What are advantages of injection mold ultrasonic cleaning system?
The process of cleaning injection mold components via ultrasonic bath offers significant advantages over traditional manual scrubbing. The use of abrasive techniques, of any kind, is detrimental to the tool surface, especially those that are highly finished. The ultrasonic method does not invade the surface of the steel the way conventional friction-based methods do. Ultrasonic cleaning uses a system called cavitation—the rapid forming and collapsing of millions of very small bubbles in a bath of water and suitable biodegradable cleaner. Although tiny, these little bubbles are tenacious fighters and will work their way into and around all mold-component surfaces—crevices, grooves, channels, blind holes … The ultrasonic process has proven itself to be extremely effective in removing the residues and contaminants from mold releases, burnt resin, and vent outgas without harming the surface of the steel.
The ultrasonic cleaning cycle takes 20 minutes for most applications, with additional time or cycles required for molds running high-temperature/gassy resins. Certain performance-enhancing additives (flame retardants or talc filler, for example) can also be detrimental to good mold-steel health without regular cleaning.